Creazen Panels

CreaZen® is a panel fence system with an attractive design, inspired by natural elements.

Assets :

• Stylish
• Pure design
• Discrete
• Sleek installation

CREAZEN PANELS SPECIFICATIONS

The panels have a width of 2400 mm and are available in a range of heights from 1000 to 2000 mm.

The vertical square tubes are welded at both sides of the horizontal tubes, in a criss-cross way.

The spacing between the vertical tubes is max. 110 mm

Horizontal rectangular tubes: 40 x 20 mm

Vertical square tubes: 20 x 20 mm

RECOMMENDED POST FOR CREAZEN

Bekafix  CreaZen panels are foreseen to be installed on Bekafix posts. These are tubular posts profiled in "H" shape with side sleeves on the left and right. Cross-section of the post: 70x44 mm. Thanks to this specific profile, installation is very easy in all situations (slopes, angles, etc....). In the standard version, Bekafix posts are supplied with a specific cap included a hook, which is not necessary for CreaZen panels. Optionally you can equip your Bekafix post with a flat flush post cap, which gives a much nicer visual aspect to your combination of CreaZen panels and Bekafix posts.

ACCESSORIES

• Intermediate fixation clamp (plastic), with stainless steel nuts and bolts
• Bekafix base plates
• Corner fixators for angles (10° up to 180°)
• Closing caps for vertical tubes

COATING TECHNIQUE AND COLOURS

The welded CreaZen panels are hot dip galvanized and polyester coated. The Bekafix posts are galvanized inside/outside and also polyester coated.

Polyester thickness is minimum of 60 microns.

Colors

• Anthracite RAL 7016
• Other colors on request.